Syncing the Balance Smart Scale with iOS Devices

It is often a good idea to keep track of your weight for various health reasons so let's go take a look at how we can Weigh-In on the Balance Smart Scale with iOS Devices.

NOTE: The App is not optimized for iPad therefore, we strongly recommend using a Smartphone.

Step #1:

Make sure the Scale is on a hard surface floor such as wood or tile where there is no carpet.

Step #2:

Then, check to ensure your iOS Device has Bluetooth turned ON. (You do not need to pair it.)

Step #3:

Take off your socks and shoes as you must be barefoot before standing on the scale.

Step #4:

Next, tap to open and log into your Patient Account so you're on the app 'Home' screen.

Step #5:

Now, tap on Weigh-In near the upper left and your app will start 'Establishing Connection'.

Step #6:

Begin going through the Calibration Setup/Reset process to ensure the Scale is ready for usage.

Step #7:

After calibrating, wait for Establish Connection and stand on the scale until it says Weight Data Saved .

NOTE: The weigh-in process usually takes about 10-15 seconds.

 

If you have any problems with Syncing the Scale on iOS, contact [e-mail].